| Outside
Mount |
 |
 |
 |
Be
sure to be precise in
setting the height. |
Attach
the First
Spacer Block To the Wall |
Snap
on up to three additional spacers which add ½" of depth
each. |
|
 |
 |
 |
|
An
extension bracket with a ceiling mount bracket can provide
additional extension if needed. |
Leveling
is important on all Luminette Sheers, but even more so for
PowerGlide. An irregular shape could cause the motor to stall. |
If
the surface is irregular, shims may be required to get the
brackets installed just right. |
|
| Inside
Mount |
|
|
 |
 |
|
| Check
the level of the inside mount opening before you place brackets.
Use shims if needed to align the brackets. |
Measure
to ensure that all brackets are an equal distance from the back. |
|
|
| Install
the Track |
 |
 |
|
| Attach
the AC Transformer and the Satellite Eye but do NOT plug the
power supply into the wall yet. |
After
the connections are made, run the wires through the guard to
keep them from pulling out as you install the SofTrak. |
Place
the Track into the brackets. |
Test
Before The Vanes Are Attached
By testing the operation of the track BEFORE
you attach the vanes, you'll be able to make any adjustments
much more quickly and without the hassle of moving the vanes. |
 |
|
|
|
After
the SofTrak is installed, plug the power supply into a standard
wall outlet |
Set
The Remote Control to the Traverse (or Channel 2)
position. Press the down button to traverse the
carriers across the track. If the motor seems to slow
or stall near a bracket, it may indicate an irregular
depth or non-level track. |
Switch
the Remote Control to Tilt (Channel 1) and test the tilt
operation of the carriers in both directions by pressing the
down and up buttons. Watch the carriers to make sure they
are aligned and move uniformly. |
|
|
 |
 |
| Attach
the Satellite Eye in a position to which the owner will be able
to point the remote control directly. Angle the satellite
eye if necessary. |
Attach
the vanes to the carriers. And repeat all tests once all vanes
are attached. |
Use
the C-Clamps provided to discretely attach the cable from the
power supply. |
|
| If
it looks easy —that's because it is. Be sure to offer
PowerGlide to all of your Luminette customers.
Download the Luminette
With PowerGlide Owner's Manual |
