|
|
|
|
|
Number 202 | January 28, 2005 |
|
|
It's Like HDTV For Your Windows! New
TRU-VIEW™ Rear Tilt Option |
|
The
new Rear Tilt operating system called Tru-View™ Rear Tilt system is now
available for Heritance Hardwood Shutters. This new tilt option will provide unobstructed views
and allow your customers to control louver rotation with only one rear tilt bar for
panels up to 66 inches in height. For panels over 66 inches, a divider
rail is used to allow the panel louvers to operate in sections.
Take a look from the back and you will see that each louver on a Tru-View system shutter is notched to allow for full closure. The color coordinated connector (left) is always located on the hinged side of the panel. It will be fully recessed when the louvers are tilted up to their fully closed position.
The only difference in measuring for shutters when using the Tru-View Rear Tilt system is the need to allow for an additional clearance of 3/8" behind the panel. Other than that all measuring and installation techniques are the same as for panels using the traditional tilt-bar. |
|
|
Ordering Tru-View To order Tru-View Rear tilt, simply mark an "R" in the "Tilt Bar" space on the authorized Heritance order form. Front tilt bars should be marked with an "F" |
|
|
Advantages Of Tru-View Rear Tilt System:
|
|
|
|
|
Hunter
Douglas Tru-View - The new HDTV
Heritance
uses superior methods to achieve the openness provided by Tur-View. This ensures
trouble-free operation for the life of the shutter. From the front you see
just louvers in the open or
closed
position. To operate them, like any other shutter, you simply grasp one
louver and move it to the desired tilt position.
The
connector is attached by a double diamond-knurled pin which allows full
rotation, precise and reliable louver adjustment.